SEAS Excel drive units have been designed for the discerning listener who will accept nothing less than the very best. SEAS Excel drive units challenge the state of the art; combining world-class engineering with advanced materials and precise manufacturing techniques.
There are no articles in this category. If subcategories display on this page, they may contain articles.
The SEAS Excel woofer Line offers 2 proprietary cone materials, available in drivers sized from 12 cm to 26 cm. SEAS is the only loudspeaker company in the world to offer high purity, die-cast and machined magnesium cones. These cones feature extremely high stiffness along with good internal damping. SEAS Excel Magnesium cone drivers are world renowned for their high definition, low distortion and sound reproduction.
For those listeneres preferring soft cone drivers, the SEAS Excel Line offers our exclusive Nextel series. Excel Nextel drives feature a "sandwich" construction of paper, coated with Nextel paint on the front surface and damping compound on the rear. The resulting cone is both lightweight and well damped; offering an extreremly linear frequency response.
All SEAS Excel woofers feature advanced motor structures utilizing copper shorting rings above and below the gap, as well as solid metal phase plugs for superior acoustical performance and enhanced cooling.
|Item||12cm units||VC diam||Fo||VAS||QTS||Features|
|E0021-08S||W12CY001||26 mm||45 Hz||6 liter||0.36||Magnesium cone|
|E0044-08S||W12CY003||26 mm||60 Hz||4 liter||0.36||Nextel coated paper cone|
|Item||15cm units||VC diam||Fo||VAS||QTS||Features|
|E0015-08S||W15CY001||26 mm||38 Hz||14||0.36||Magnesium cone|
|E0037-08S||W15CH001||26 mm||38 Hz||14||0.42||Magnesium cone, Hexadym system|
|E0041-08S||W15LY001||26 mm||49 Hz||12||0.45||Nextel coated paper cone and chassis|
|E0043-06S||M15CH002||26 mm||67 Hz||6||0.40||Nextel coated paper cone and chassis, Hexadym system|
|Item||16cm units||VC diam||Fo||VAS||QTS||Features|
|E0049-04S||W16NX001||39 mm||37 Hz||15 liter||0.33||Magnesium cone|
|E0049-08S||W16NX001||39 mm||39 Hz||14 liter||0.35||Magnesium cone|
|E0073-08||W16NX003||39 mm||36 Hz||17 liter||0.34||Graphene magnesium cone|
|Item||18cm units||VC diam||Fo||VAS||QTS||Features|
|E0017-08S||W18EX001||39 mm||34 Hz||30||0.26||Magnesium cone|
|E0018-08S||W18E001||39 mm||34 Hz||30||0.42||Magnesium cone|
|E0042-08S||W18NX001||39 mm||40 Hz||24||0.34||Nextel coated cone and chassis|
|E0074-08||W18EX003||39 mm||32 Hz||29||0.30||Graphene magnesium cone|
|Item||19cm units||VC diam||Fo||VAS||QTS||Features|
|E0076-08||W19NX001||39 mm||34 Hz||24||0.41||Graphene magnesium cone|
|Item||22cm units||VC diam||Fo||VAS||QTS||Feastures|
|E0022-08S||W22EX001||39 mm||25 Hz||98 liter||0.34||Magnesium cone|
|E0045-08S||W22NY001||39 mm||33 Hz||72 liter||0.30||Nextel coated cone and chassis|
|Item||26cm units||VC diam||Fo||VAS||QTS||Features|
|E0026-08S||W26FX001||52 mm||20 Hz||162 liter||0.35||Aluminium/magnesium alloy cone|
|E0046-08S||W26FX002||52 mm||31 Hz||87 liter||0.39||Nextel coated paper cone and chassis|
SEAS Excel Dome Tweeters are available in 25 mm, 29 mm and 35mm diaphragm sizes, with dome materials of textile, aluminium, magnesium, beryllium and diamond.
All Excel tweeters utilize extremely stiff die-cast front plate and rear chamber assemblies for maximum stability, excellent heat transfer and minimum cabinet induced vibration.
Excel tweeters feature advanced magnet systems that combine high magnetic flux with optimum venting of the critical areas behind the dome. They utilize magnets of high strength ferrite or neodymium, depending on the model. Large vent holes in the pole piece combined with critically placed damping materials, result in smooth frequency response and low resonance frequency.
In the White Diamond, Millennium, Crescendo and Magnum tweeters our patented Hexadym magnet system further reduces reflections and back pressure by allowing full venting of the voice coil gap and the space behind the dome surround.
|Item||25 series||VC diam||Fo in Hz||Features|
|E0006-06||T25CF001||25 mm||700||Fabric, magnetic fluid|
|E0011-06||T25CF002||25 mm||500||Fabric, hexadym magnet system, magnetic fluid|
|Item||29 series||VC diam||Fo in Hz||Features|
|E0040-06||T29CF002||25 mm||500||Fabric, hexadym magnet system, Nextel coating|
|E0058-06||T29B001||25 mm||533||Beryllium, neodymium magnet system|
|E0100-04||T29D001||25 mm||510||Diamond, hexadym magnet system|
|E0101-04||T29D002||25 mm||510||Diamond, hexadym magnet system|
|Item||35 series||VC diam||Fo in Hz||Features|
|E0055-06||T35C002||35 mm||620||Coated fabric, neodymium magnet system|
SEAS designed and manufactured its first coaxial drivers more than 20 years ago.
Early on, R&D engineer Bjørn Børja recognized the unique possibilities created by the new neodymium magnet technologies; allowing us to design a high performance tweeter in a very compact package. SEAS has continuously refined coaxial driver technology over the years, and today remains the only loudspeaker driver manufacturer to make this unique technology available to the OEM and hobbyist markets.
Never standing still, the R&D lab recently decided to see what could be accomplished by applying our state of the art Excel technology to a coaxial drive unit. The answer can be found in our new Excel C16N001/F, and the results are amazing.
|Item||16cm coax||VC diam||Fo||VAS||QTS||Features|
|E0051-04/06||C16N001/F||39 mm||37 Hz||15||0.49||Magnesium cone, double chamber tweeter|
|E0080-04/06||C16NX001/F||39 mm||35 Hz||16||0.31||Graphene Magnesium cone, double chamber tweeter|
|Item||18cm coax||VC diam||Fo||VAS||QTS||Features|
|E0060-08/06||C18EN002/A||39 mm||85 Hz||5||0.54||Dedicated midrange, aluminium/magnesium cone and tweeter dome|