SP18R is a passive radiator intended for use as an alternative to the port in a bass reflex cabinet, together with an active woofer of similar size or smaller.

In many applications, the traditional bass reflex port may produce high speed air noise or even have poor effect due to a small port area or a large port length. In such cases, a passive radiator may bring about an improvement.

The chart below will show you the mass which has to be added to the cone of the passive radiator in order to obtain the desired Helmholtz resonance frequency in a given cabinet volume.

The passive radiator cone is equipped with an M4 screw to which you can easily attach the added mass.

For optimum performance, the passive radiator should be mounted vertically (with horizontal cone axis). This is especially important when a significant additional mass is used.

  SEAS PRESTIGE LOGO
 
e_seas_prestige_loudspeaker_passive-radiator_6.5 inch_18cm_H.jpg
pdfDownload Datasheet SP18R
 
Additional weight/cabinet volume
 
Dimensions
f_seas_prestige_passive_radiator_h9944_sp18r.jpg   d_seas_prestige_passive_radiator__h9944_sp18r.jpg
Specifications

s seas prestige passive radiator h9944 sp18r

 SEAS reserves the right to change technical data

Prestige Passive Radiator

  • H9944 SP18R +

    SP18R is a passive radiator intended for use as an Read More
  • H9945 SP22R +

    SP22R is a passive radiator intended for use as an Read More
  • H9946 SP26R +

    SP26R is a passive radiator intended for use as an Read More
  • 1

SEARCH